BESIL 9003 neutral transparent one-component silicone adhesive sealant
We have strategic cooperation with more competitive electronic device manufacturers in the world, and continue to provide a wide range of electronic device products and perfect services for OEM manufacturers, ODM manufacturers and brand manufacturers, and continue to meet customer's differentiated needs, order rapid response processing needs, order fragmentation needs, cost reduction needs, technical support and operational management needs, etc.
Key words:
Classification:
Detailed description
Product characteristics
BESIL 9003 neutral transparent one-component silicone adhesive sealant
◆ Excellent insulation performance
◆ High transparency and high physical and mechanical properties
◆ With moisture-proof, dust-proof, anti-corona and seismic buffer effect
Good high and low temperature resistance, temperature range of -60~260 ℃
◆ Excellent aging resistance, service life of up to 20~30 years
◆ After curing, the colloid is not yellowing, no oil leakage, excellent comprehensive performance
Product Application
◆ LED lamp sealing
◆ Plastic metal enclosure seal
◆ PCB board components
◆ Fix the electronic wiring harness
Method of use
◆ Clean the surface: clean the surface of the sticky or coated object, and remove rust, dust and oil stains.
◆ Sizing: Unscrew (or peel) the cap of the rubber tube, squeeze the glue solution to the cleaned surface to make it evenly distributed, and close and fix the bonded surface.
◆ Curing: Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. Within 24 hours (room temperature and 55% relative humidity), the glue will cure to a depth of 4mm and nearly 8mm in 48 hours;
◆ If the sizing position is deep, especially the part that is not easy to contact the air, the complete curing time will be extended, and if the temperature is low, the curing time will also be extended.
Product Parameters
Recommend Products
Thermal interface material high thermal conductivity potting adhesive
High thermal conductivity potting glue is mainly used for high power density components potting, waterproof potting, thermal conductivity, heat dissipation and other aspects, such as new energy vehicles, electronic communications, solar photovoltaic, energy storage and other fields.
Thermal interface material Thermal conductive gel
Thermal conductive material with very low deformation force, with certain fluidity, strong plasticity, similar to plasticine
Thermal Interface Material Thermal Gasket
Easy to use-no heat and cure required; can be easily cleaned or reworked; use as you go.
Thermal interface material Thermal conductive silicone grease
It is a common interface thermal material, often applied by printing or dot coating.
Online Consultation
Contact Phone:+86 13510478804
E-mail:tingyu yuan@easystrive.com
Address: 12th Floor, Block C, Kupai Building, Intersection of Keyuan Avenue and Baoshen Road, Nanshan Gaoxin North District, Songpingshan Community, Xili Street, Nanshan District, Shenzhen
Focus on us