Baigao BEPU 6080 two-component transparent polyurethane potting adhesive
We have strategic cooperation with more competitive electronic device manufacturers in the world, and continue to provide a wide range of electronic device products and perfect services for OEM manufacturers, ODM manufacturers and brand manufacturers, and continue to meet customer's differentiated needs, order rapid response processing needs, order fragmentation needs, cost reduction needs, technical support and operational management needs, etc.
Key words:
Classification:
Detailed description
Product characteristics
◆ Working temperature range -50 to 100 ℃
◆ High transparency
◆ Excellent heat resistance
◆ Long-term protection against UV A and UV B
◆ No yellowing
◆ Fast curing and fast demoulding l extremely accurate molding effect l lighter than glass
Product Application
Used in pouring and potting of communication equipment, transformers, control power supplies, ignition controllers, electronic sensors, etc.
Method of use
Preparation before use
◆ Preparation of raw materials: It is recommended to pour the whole barrel of combined materials into the material cylinder and stir evenly. It is also possible to roll the combined materials in the barrel evenly before pumping the materials into the material cylinder.
◆ Defoaming treatment: In order to prevent the generation of bubbles in the finished product, each material cylinder needs to be defoamed before production: usually under a pressure of 0-2mmHg, stir and vacuum for 10 minutes, and then start the glue filling work.
Mixing ratio error: The deviation of the mixing ratio will affect the demoulding time and mechanical properties of the product, and the error is best <0.5.
◆ Other: During the production process, the material tank is always kept closed. If compressed gas is required, it must be dry, otherwise the B material will become viscous and affect the mechanical properties of the finished product.
Recommended processing conditions
◆ Machine: pouring type low press (gear pump or volumetric metering pump or plunger pump)
Mixing method: recommend use static or dynamic mixer material
◆ Warm material A: 25-30 ℃, material B: 25-30 ℃
◆ Equipment anti-curing time setting The operation time of glue is about 20mins, and the equipment anti-curing spitting time setting is controlled at 15mins.
Product Parameters
Recommend Products
Thermal interface material high thermal conductivity potting adhesive
High thermal conductivity potting glue is mainly used for high power density components potting, waterproof potting, thermal conductivity, heat dissipation and other aspects, such as new energy vehicles, electronic communications, solar photovoltaic, energy storage and other fields.
Thermal interface material Thermal conductive gel
Thermal conductive material with very low deformation force, with certain fluidity, strong plasticity, similar to plasticine
Thermal Interface Material Thermal Gasket
Easy to use-no heat and cure required; can be easily cleaned or reworked; use as you go.
Thermal interface material Thermal conductive silicone grease
It is a common interface thermal material, often applied by printing or dot coating.
Online Consultation
Contact Phone:+86 13510478804
E-mail:tingyu yuan@easystrive.com
Address: 12th Floor, Block C, Kupai Building, Intersection of Keyuan Avenue and Baoshen Road, Nanshan Gaoxin North District, Songpingshan Community, Xili Street, Nanshan District, Shenzhen
Focus on us