BEEP 6108 Transparent Two-Component Epoxy Potting Adhesive
We have strategic cooperation with more competitive electronic device manufacturers in the world, and continue to provide a wide range of electronic device products and perfect services for OEM manufacturers, ODM manufacturers and brand manufacturers, and continue to meet customer's differentiated needs, order rapid response processing needs, order fragmentation needs, cost reduction needs, technical support and operational management needs, etc.
Key words:
Classification:
Detailed description
Product characteristics
◆ This product is a transparent color epoxy potting material
◆ Resistant to moisture, dirt and other atmospheric components
◆ High strength, excellent adhesion, cracking resistance, toughness
◆ With security, no solvent, no curing by-products
◆ Stable mechanical and electrical properties between -45-90 ℃
Product Application
Suitable for hard light bar, display module, photoelectric sensor, intelligent water meter and other photoelectric display devices and system
Method of use
◆ Please stir evenly before taking and use. A and B should be sealed and stored after taking and use.
◆ Attention should be paid to stirring in the same direction when stirring, otherwise too many bubbles will be mixed in; The rubber material on the frame and bottom of the container should also be stirred evenly, otherwise there will be stirring
◆ uneven mixing caused by local non-curing phenomenon.
◆ Pouring to the product again vacuum to remove bubbles, can improve the comprehensive performance of the product after curing.
◆ Too low temperature will lead to slow curing speed, it is recommended to heat curing; Potting thickness of more than 2cm cannot be directly cured at 100 ℃, so as not to cause explosion.
◆ The curing process of this glue is exothermic reaction, and the amount of glue will affect the length of operation time, so the operation time under 100g of glue is only a reference time.
Product Parameters
Recommend Products
Thermal interface material high thermal conductivity potting adhesive
High thermal conductivity potting glue is mainly used for high power density components potting, waterproof potting, thermal conductivity, heat dissipation and other aspects, such as new energy vehicles, electronic communications, solar photovoltaic, energy storage and other fields.
Thermal interface material Thermal conductive gel
Thermal conductive material with very low deformation force, with certain fluidity, strong plasticity, similar to plasticine
Thermal Interface Material Thermal Gasket
Easy to use-no heat and cure required; can be easily cleaned or reworked; use as you go.
Thermal interface material Thermal conductive silicone grease
It is a common interface thermal material, often applied by printing or dot coating.
Online Consultation
Contact Phone:+86 13510478804
E-mail:tingyu yuan@easystrive.com
Address: 12th Floor, Block C, Kupai Building, Intersection of Keyuan Avenue and Baoshen Road, Nanshan Gaoxin North District, Songpingshan Community, Xili Street, Nanshan District, Shenzhen
Focus on us