What is the purpose of the Fakra connector?
Release time: 2022-11-24
I believe that many friends are not clear, in order to enhance everyone's understanding, the following small series on this issue for a specific introduction, interested in a look at it! If you are also interested, you may wish to check it out here.
I believe that many friends are not clear, in order to enhance everyone's understanding, the following small series on this issue for a specific introduction, interested in a look at it! If you are also interested, you may wish to check it out here.
Fakra connector is also a popular product now. But many people still don't understand its role. The first thing we need to know is that fakra's wiring is very simple, basically crimping. The characteristics of the product itself help us simplify the wiring process. Of course, it can also be ensured that the terminal is installed in place during use, and the holding force of the terminal is increased. There is a structural design to prevent misinsertion at the plug-in interface of the fakra connector, and different anti-misconnection structures have corresponding plastic shells of different colors. This product insulation material (shell): nylon 66 (leakage current breakdown resistance, elasticity, rigidity, corrosion resistance, environmental protection, halogen-free, formaldehyde-free. Temperature -35°C-105°C). Of course, there are also common pressure reed materials, steel (installed on the press mold (installed on the material) processing) processing, high precision, no burrs, repeated use can maintain elasticity, strong tensile and corrosion resistance, increase wire insert Pull out wear resistance). Its contact material is mainly to thicken the electrolytic copper-tin plate (excellent electrical conductivity, thermal conductivity, ductility, corrosion resistance, and prevent contact heating).
Fakra its processing method is wire insulation wrapping. Now the relatively simple method is to splice first, then enamel, and then wrap with high-strength insulating tape. A common standard wire connector method is the crimp cap connection method. This method is a safe, standard and practical wire connection method. Only one wire is allowed to be connected to the junction box and terminal. Remind everyone that each wire should be protected by a stringer tube. In short, the use of fakra is very simple. According to the calibrated length, we strip the wire of about 10mm of the insulation, then lift the operating lever, put the wire into the connector, and release the operating lever. Compared with the method of connecting with electrical tape, the wiring is safer and more reliable, and the operation is simpler and more convenient. Fakra has the advantages of flame retardant, pressure resistance, insulation, simple operation, firm connection, direct current transmission between wires, strong versatility, and long service life. Or when making an indoor circuit renovation, the wires usually go through the floor and wall; but when we wire the kitchen and bathroom, the circuit will go through the wall and top.
The content of the above article is about the use of fakra connectors for all friends, and a better fakra connector manufacturer is also shared in the content. If you have this demand, you can check it out, hoping to bring you help.
Recommend News
Contact Phone:+86 13510478804
E-mail:tingyu yuan@easystrive.com
Address: 12th Floor, Block C, Kupai Building, Intersection of Keyuan Avenue and Baoshen Road, Nanshan Gaoxin North District, Songpingshan Community, Xili Street, Nanshan District, Shenzhen
Focus on us